







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fullerton Homeowners Choose Toto Construction
We provide independent Toto construction service in Fullerton, from single-fixture repairs to full bathroom remodels built around Toto ceramics and electronic Washlet seats. What sets our Toto work apart is component-level familiarity: we know which parts of a Drake tank wear out, why a Washlet stops heating evenly, and when the honest answer is a valve job rather than a new fixture. You choose the brand, we handle the build.
Fullerton is a built-out North Orange County city, and nearly all of the work here is remodel, addition, and ADU work on pre-1970s single-family lots rather than new construction. That means old plumbing, tight bathrooms, and a lot of decisions made inside rooms that were never designed for the fixtures going into them. Toto fits that kind of work well, and we’ve learned where the friction points show up.
To be clear about who we are: Construction Fullerton is an independent remodel and repair resource. We are not affiliated with, authorized by, or acting as an agent of Toto. You can reach us at (844) 834-8322.
Why Trust Construction Fullerton for Your Toto Construction?

Our technicians have up to 14 years of experience, and a good share of that has been spent with Toto fixtures specifically. That matters because Toto’s designs are not generic. The G-Max and Tornado flush towers behave differently from other gravity flush systems, and a technician who hasn’t worked on them tends to misdiagnose a scale problem as a failing valve. Knowing those patterns beats a guess.
We also take a warranty-safe approach. We use genuine Toto OEM fill valves, flappers, and washlet seat and nozzle assemblies for the flush and electronic components, and quality aftermarket parts only for non-critical trim like supply lines and mounting bolts. That keeps the components that matter within the brand’s own specification.
The other thing we do is triage honestly. A running Drake is almost always a cheap OEM valve job, and we’ll tell you that instead of quoting a replacement. The written estimate is free and sets the final price before any work begins. That transparency is the whole point of working with a contractor who knows the brand rather than one who substitutes around it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Fullerton
Fullerton’s water runs hard, and that single fact drives most of the Toto issues we see in the area. Here’s what typically fails and why.
- Flapper and fill valve wear in Drake and Ultramax II tanks. The flapper loses its seal and the fill valve starts drifting, so the toilet refills on its own for a few seconds at random. This is the most common Toto repair we run, and it’s a cheap OEM part swap in most cases.
- Weak flush that isn’t the valve at all. Scale packs into the rim jets on Toto ceramic bowls and mimics a failing flush valve. No amount of holding the handle down clears it. The fix is clearing the jets and checking the supply, not replacing the toilet.
- Washlet nozzles that stop spraying evenly. Mineral scale clogs the nozzle assembly, and the spray pattern weakens or skews. Fullerton’s hard water makes this a routine maintenance reality rather than a manufacturing defect. Cleaning or replacing the nozzle assembly usually restores full function.
- Washlet heaters that stop heating consistently. The water heater in an electronic seat is a wear item, and when it starts losing temperature alongside a sensor problem, we weigh the cost of both components against a replacement seat.
- ECOPOWER sensor faucets and flush valves that run continuously or don’t trigger. The turbine or solenoid fails, leaving a commercial-style fixture stuck open or silent. These are internal electronic parts, and diagnosis means testing the trigger mechanism before assuming the whole valve is gone.
Toto Parts & Our Repair-vs-Replace Approach

Parts decisions on Toto equipment are straightforward once you know which components are critical. Genuine Toto OEM fill valves, flappers, and washlet seat and nozzle assemblies go into the flush and electronic systems. Non-critical trim like supply lines and bolts gets quality aftermarket. We don’t claim to stock OEM or genuine parts, and we’re not a Toto dealer. We source what fits and install it correctly.
The repair-versus-replace call is where honest triage earns its keep. A running Drake is almost always a valve and flapper job, so we fix it. When a Washlet’s heater and sensor board both fail, replacement of the seat usually beats repair, and we’ll say so. One-piece fixtures get their own assessment because the internal components and access differ from a two-piece tank.
If you’re hearing phantom refills or losing spray pressure, call us and we’ll walk you through what we think is happening before anyone comes out. Call (844) 834-8322. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We test the flush and fill cycle, check the supply and shutoff, and inspect the rim jets for scale. On a Washlet, we check the nozzle assembly, water heater temperature, and seat sensors individually so we’re not guessing at a multi-part failure.
- 2
Repair or install. With the written estimate approved, we swap the worn OEM valve and flapper, clear the rim jets, or install the new Toto fixture to the existing flange and supply. On ECOPOWER equipment, we test the turbine or solenoid before replacing the whole valve body.
- 3
Testing. We run multiple flush cycles, verify the fill valve stops cleanly, and confirm the Washlet heats and sprays at the settings the owner uses. A repair isn’t done until the symptom is gone under real conditions.
- 4
Warranty and follow-up. We explain what was replaced and why, and we stand behind the workmanship. If the same symptom returns, we want to know about it.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Fullerton

We work across the Toto lineup commonly found in Fullerton homes. That includes two-piece gravity toilets like the Drake (CST743 and CST776), the Ultramax II one-piece (MS604114CEFG), the Washlet C5 and S550e electronic bidet seats, and EcoPower sensor faucets and flush valves. On the remodel side, Toto fixtures fit into the bathroom projects we handle across the city, from a full bathroom remodel to a small bathroom remodel to a vanity installation where the fixture selection is set before the tile goes in.
Because Fullerton’s older bathrooms were built around smaller footprints, we plan clearances and rough-in placement around the Toto fixture you’ve chosen rather than working backward from whatever was there before.
We Also Service These Brands
Construction Fullerton isn’t a single-brand operation. We specify and service KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems, and PGT windows and doors alongside our Toto work. That matters on multi-phase projects where the bathroom fixture, the cabinets, and the roof all need to move on the same schedule under one team. One contractor, every phase.
FAQs – Toto Construction Service in Fullerton
Is Construction Fullerton authorized by Toto? No. We are an independent Toto service provider. We are not affiliated with, authorized by, or acting as an agent of Toto, and we don’t claim to be a dealer or factory-certified. We repair, install, and service Toto equipment with quality parts that fit it. Call (844) 834-8322 to book a free estimate.
Do you use quality parts that fit Toto equipment? Yes. We use genuine Toto OEM fill valves, flappers, and washlet seat and nozzle assemblies for the flush and electronic components, with quality aftermarket parts only for non-critical trim like supply lines and bolts. We don’t claim to stock OEM parts; we source what fits and install it correctly.
How long does Toto service take? A tank valve and flapper job on a Drake or Ultramax II is a short same-day visit in most cases. Clearing rim jets and checking the supply adds a little time. A Washlet diagnosis on the nozzle assembly, water heater, and sensors takes longer because each component gets tested individually. A full bathroom remodel is measured in weeks, not hours. Call (844) 834-8322 for an exact timeline.
What kinds of Toto products do you cover? Two-piece gravity toilets like the Drake, the Ultramax II one-piece, Washlet C5 and S550e electronic seats, and EcoPower sensor faucets and flush valves. We also install Toto fixtures as part of bathroom remodels, small bathroom remodels, and vanity projects in Fullerton.
Will service void my Toto warranty? Repairing a Toto fixture with genuine OEM components for the flush and electronic parts is a warranty-safe approach. We’re an independent provider, not a manufacturer agent, so we can’t speak for Toto’s warranty terms or administer a claim on their behalf. We recommend keeping your documentation and checking the terms that came with the fixture.
How much does Toto construction cost in Fullerton? It depends on the scope. A valve and flapper repair is one of the lower-cost jobs on the pricing table below, while a remodel that includes new Toto fixtures runs higher. These are typical estimated ranges, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 834-8322 for an exact quote on your Toto project. Estimates are free.
Book Your Toto Service in Fullerton, CA
Whether a Drake is running on its own, a Washlet has lost its heat, or you’re planning a bathroom remodel around Toto fixtures, we can help. Call (844) 834-8322 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re an independent provider, and the written estimate sets the final price.
Written by the team at Construction Fullerton.












