







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Fullerton?
Backsplash installation in Fullerton typically costs $800 – $2,500 for most kitchen projects, including materials and labor. A simple ceramic tile run along a standard counter usually lands near the low end, while large-format porcelain, natural stone, or a full wall of glass tile with careful layout pushes toward the top. The written estimate sets the final price, and on a small galley kitchen in a mid-century Fullerton home the range is often narrower than a wall-to-wall remodel in a newer build.
We give free estimates and can usually work the tile selection into a broader kitchen plan. Call (844) 834-8322 to get a number for your kitchen. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Backsplash Installation Cost Breakdown (2026)
The table below shows typical estimated ranges for Fullerton, split into the pieces homeowners actually pay for. Treat these as a planning guide, not a quote – the written estimate is what sets the price.
- Standard ceramic or porcelain tile backsplash (materials): $150 – $500
- Glass mosaic or glass subway tile: $300 – $900
- Tumbled natural stone or travertine tile: $350 – $1,000
- Large-format porcelain slab (fewer grout lines): $500 – $1,400
- Labor and installation: $400 – $1,200
- Wall prep, substrate repair, and backing: $100 – $400
- Electrical work to add or reset outlets: $150 – $450
A simple 30-square-foot backsplash in ceramic tile comes in around $800 – $1,200 installed. A larger run or a trickier material – stacked stone, an ornate pattern, a full-height wall behind the range – climbs toward the top of the $800 – $2,500 range. The biggest single driver is material, and the second is how much cutting and layout the job demands. If you’re already planning other kitchen work, it often helps to quote the backsplash alongside a countertop installation or a cabinet installation so the tile, the counters, and the layout all get planned together.
What Affects Backsplash Installation Pricing in Fullerton
- Tile material and finish. Ceramic costs the least; glass, natural stone, and large-format slab cost the most. A patterned or handmade tile raises the labor line because each piece needs careful setting and layout.
- Kitchen size and linear footage. A compact galley in an older Fullerton bungalow might need 25 square feet, while a large open kitchen can run past 60. More square footage means more material, more cuts, and more labor.
- Wall condition. Older homes around downtown Fullerton often have drywall or plaster that needs patching, leveling, or new substrate before tile goes up. Patching drywall, correcting an out-of-square wall, or replacing damaged backer board adds cost.
- Layout complexity. A simple running bond is more affordable. A herringbone, chevron, stacked, or custom mosaic pattern takes longer to install and costs more in labor.
- Outlets and switches. Cutting tile around existing outlets is standard. Moving an outlet, adding a switch, or installing a new one behind the counter means electrical work, which is a separate line item.
- Height of the backsplash. Most jobs stop at the bottom of the upper cabinets. A full wall of tile behind the range, up to the ceiling, or a full-height slab wall costs more than a short standard run.
Fullerton’s mix of older homes and newer builds makes wall condition a real variable. In a house built in the mid-20th century, the wall behind the counter has often been patched and re-patched over the years, so a clean substrate sometimes has to be rebuilt before the first tile goes on. That prep doesn’t show in the finished kitchen, but it’s what keeps a backsplash flat and lasting. It’s also why we inspect the wall before we quote rather than guessing from a photo.

How to Choose a Material Without Overspending
The material is where the budget moves most, so it’s worth choosing deliberately. A few practical guidelines fit most kitchens we look at in Fullerton:
- Ceramic or porcelain tile gives you the widest range of looks for the lowest material cost. It’s durable, easy to clean, and holds up well in an active kitchen.
- Glass tile looks bright and reflects light, which helps in smaller kitchens. It costs more than ceramic but often reads as a higher-end finish.
- Natural stone (travertine, marble, slate) adds character but needs sealing and shows water spots if not cared for. It sits near the top of the material range.
- Large-format porcelain slab has fewer grout lines and a modern look. It costs more in material but can reduce labor because there’s less to set.
If your countertops are being replaced at the same time, choose the tile and the countertop surface together so the tones and thicknesses match. When the counters and the backsplash are specified as a package, you avoid the mismatch that happens when each is picked separately. That’s one reason we quote a countertop installation and a backsplash together when both are on the plan.
What Does Backsplash Installation Include?
A typical installation covers more than setting tile. Here’s what a well-run job includes:
- Measuring and layout. We measure the linear footage and plan where cuts fall, especially around outlets, windows, and the range.
- Surface prep. The wall is cleaned, patched, and leveled so the tile sits flat and the grout lines stay consistent.
- Setting the tile. Tile adhesive and grout are applied, tile is set and spaced, and cuts are made around fixtures.
- Grouting and sealing. Grout is applied and cleaned, and natural stone is sealed to protect it.
- Cleanup. The counters and cabinets are protected during the work, and the area is cleaned when the job is done.
If outlets need to move, that electrical step is scheduled around the tile work so the wall isn’t opened twice. If you’re planning a larger remodel, this is the point where a kitchen remodeling quote becomes useful, because the backsplash is one piece of a sequence that includes cabinets, counters, and plumbing.
How to Save on Backsplash Installation
You don’t need to spend the top of the range to get a good-looking kitchen. These moves keep the cost down without cutting corners on the finish.
- Stick to a standard height. A backsplash that stops at the bottom of the upper cabinets costs less than running tile to the ceiling. Full-height tile looks great but adds material and labor.
- Choose a simpler layout. A running bond or stacked pattern installs faster than herringbone or chevron. If you love a pattern, use it as an accent strip rather than across the whole wall.
- Keep outlets where they are. If you don’t need to move wiring, skip the electrical line item. Cut tile around existing outlets and save the cost of new circuits.
- Combine projects. If you’re already updating cabinets or counters, add the backsplash to the same plan. Quoting it alongside a small kitchen remodel means one schedule, one set of measurements, and one cleanup.
- Reuse a sound substrate. If the wall behind the counter is solid, you avoid the cost of rebuilding it. A quick inspection tells you which way the estimate will go.
- Get a free estimate. A written estimate shows exactly where the money goes, so you can decide which upgrades are worth it. Call (844) 834-8322 and we’ll put a number together.
One word of caution on saving: don’t skimp on the prep or the waterproofing behind wet areas. A backsplash behind a sink or range sees splashes and steam, and a tile job that fails early is the most expensive kind. Better to spend a little more on a solid substrate upfront than to redo the wall later.
How Long Does Backsplash Installation Take in Fullerton?
Most residential backsplash jobs run one to three days. A small, straightforward ceramic install over a sound wall can wrap in a single day. Larger runs, natural stone, patterned layouts, or wall repairs push the job to two or three days, mostly because of drying time between setting and grouting. We schedule around your kitchen so it doesn’t sit unusable longer than necessary. If you’re also planning new cabinets or counters, we coordinate the trades so the tile goes in after the countertops are set and before the final plumbing hookups.
Backsplash Installation and the Rest of Your Kitchen
The backsplash is one part of a kitchen, and it looks best when it’s planned with the rest of the room. That’s where a single team across trades helps. We handle the cabinets, the counters, the plumbing, and the tile as one sequence rather than five separate schedules. If you’re doing a kitchen remodeling project, we can specify designer-grade surfaces – Cambria, Caesarstone, and Silestone for countertops, with Kohler, Toto, Grohe, and Moen fixtures for the sink and faucet – and match the backsplash to those surfaces so the whole kitchen reads as one design.
You choose the brand, we handle the build. When the same team coordinates the cabinet installation, the countertop installation, and the backsplash, you avoid the gap that happens when each trade blames the last one. That coordination is a big part of why homeowners in Fullerton bring us the whole kitchen instead of one piece of it.
If the project is bigger than a backsplash – a kitchen plus a bathroom, or a new addition – we can carry the same material choices across every room. You can see how we approach the full scope on our Construction Fullerton page. For the smaller jobs, a small kitchen remodel quote gives you a realistic picture of what a tighter budget can accomplish.
FAQs – Backsplash Installation Cost
How much does backsplash installation cost in Fullerton?
Backsplash installation in Fullerton typically costs $800 – $2,500 including materials and labor. A simple ceramic run sits near the low end; glass, natural stone, or large-format slab with a complex layout pushes toward the top. Call (844) 834-8322 for an exact quote – estimates are free.
Is it cheaper to install a backsplash myself?
DIY can save the labor line, which is roughly $400 – $1,200, but tile work is unforgiving. Bad layout, uneven substrate, or poor grout lines are visible and expensive to correct. For a kitchen you plan to keep, professional installation is usually worth the cost. Call (844) 834-8322 to compare a quote against your DIY plan.
How much does a full-height or slab backsplash cost?
A full-height or large-format slab backsplash typically runs $1,400 – $2,500 in Fullerton, depending on material and square footage. Extending tile to the ceiling or behind the range adds material and labor over a standard cabinet-bottom run. Call (844) 834-8322 for a quote on the exact wall.
Does a new backsplash cost more if I’m also replacing countertops?
No – it often costs less when planned together. Countertop installation in Fullerton runs $2,000 – $6,500, and adding the backsplash to the same project avoids duplicate measuring and scheduling. Combining the two usually means one clean install sequence. Call (844) 834-8322 to quote both at once.
Can you install a backsplash the same day?
Some small ceramic jobs can be set and grouted in one day, but most Fullerton backsplash installs take one to three days because of drying time. Larger runs, natural stone, or wall repairs extend the schedule. Call (844) 834-8322 and we’ll give you a realistic timeline. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Backsplash Estimate in Fullerton
A backsplash is one of those jobs where the material choice and the wall condition decide the price. We measure, check the substrate, and put the numbers in writing so you can see where the money goes before you commit. If your kitchen needs more than tile – new cabinets, counters, or a full refresh – we can plan the backsplash as part of the larger project and keep the trades on one schedule. Our technicians have up to 14 years of experience, and we spec real, name-brand materials at every stage.
Call (844) 834-8322 for a free estimate on backsplash installation in Fullerton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Fullerton market as of 2026. Construction Fullerton offers free estimates – call (844) 834-8322.
Written by the team at Construction Fullerton.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Todd Doyle"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."
- Stephanie Vaughn"He was upfront about a soil issue that added cost early rather than absorbing it and surprising us at the end."
- Paul Delaney












