







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fullerton Homeowners Choose KraftMaid Construction
We provide independent KraftMaid cabinet installation, refacing, and repair service in Fullerton, CA. What sets our KraftMaid work apart is product-specific knowledge: we know how Vantage, Reflections, Prelude, and Sonata cabinets are built, which components fail first, and which fixes hold up in Fullerton’s older homes. From a single swing-door adjustment to a full kitchen layout, we handle the work with quality parts that fit your cabinets.
To be clear about who we are: Construction Fullerton is an independent service provider. We are not affiliated with, authorized by, or a dealer for KraftMaid. We repair, install, and service KraftMaid cabinetry because we know the product, not because the manufacturer sent us.
Fullerton is a built-out city. Almost every kitchen job here is a remodel inside a 1920s-to-1960s house, not a new build. That means cabinets have to fit walls that are rarely plumb and layouts that were drawn for another era. Our technicians have up to 14 years of experience working through exactly that. Call (844) 834-8322 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Fullerton for Your KraftMaid Construction?

KraftMaid builds a broad cabinet line, and the differences between series matter at repair time. The Vantage series is a semi-custom line, Reflections is full-overlay, Prelude is framed, and Sonata refers to the solid wood drawer construction. Each one has its own hardware geometry and its own weak points. Our technicians have worked on enough of these installs to recognize the difference on sight, which saves you from a wrong-part order and a second visit.
We use quality parts that fit KraftMaid equipment. Where a factory replacement hinge, glide, or drawer is the right call, we spec one that matches the box. Where an aftermarket upgrade genuinely performs better, we’ll tell you and explain the trade-off. What we don’t do is force a no-name part into a fit it wasn’t made for.
Warranty-safe practice is part of the job, not an afterthought. We document what we remove, match the replacement to the original mounting pattern where possible, and avoid drilling new holes in a face frame unless the repair requires it. That keeps your options open if a manufacturer claim ever comes up.
Fullerton’s housing stock adds a wrinkle. Bungalows near downtown and the older tracts around Cal State Fullerton often have out-of-square walls and settling floors, so a cabinet that was perfect at the factory can rack once it’s hung. We check for that before we blame the hardware.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Fullerton
- Sink-base swelling on Vantage boxes. Particleboard cores wick moisture. A slow drip under the sink, a loose supply fitting, or years of splash from a deep basin all feed the same problem: the box swells, the floor of the cabinet softens, and the door starts to sag. In Fullerton’s dry climate the swelling often goes unnoticed until the door drops, because the surface dries while the core stays damp.
- Soft-close hinges loosening or snapping at the frame mount on Reflections doors. Full-overlay doors are heavier and swing further, so the hinge cup and mounting screws take more load. Repeated slamming fatigues the screw holes in the cabinet side, and eventually a hinge pulls free or the arm snaps. This is a hardware failure, not a door failure, and it’s usually repairable without replacing the door.
- Drawer glide screws pulling out of particleboard sides on Sonata and current full-access boxes. Glides are held by screws biting into the panel edge, and particleboard doesn’t grip like solid wood. Load a drawer heavy and cycle it a few thousand times and the screws wallow out. The drawer then drags, tilts, or falls off its runner.
- Painted Prelude door finishes cracking at the stiles near the sink and dishwasher. Moisture and heat cycles at the dishwasher opening, plus the repeated shock of a slammed full-overlay door, stress the paint at the joint between stile and panel. Hairline cracks show up first, then flaking. Catching it early keeps the repair to refinishing rather than replacement.
- Out-of-square installs in older Fullerton kitchens. A cabinet can be perfectly made and still bind if the wall behind it isn’t straight. Doors rub, drawers rack, and the homeowner assumes the cabinet is defective. We check the opening, shim and plane the run properly, and confirm the cabinet itself is sound before recommending any part replacement.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t stock OEM or genuine KraftMaid parts, and we won’t tell you we do. What we do is source quality parts that fit the cabinet in front of us. For KraftMaid specifically, factory drawers, hinges, and glides are available and worth using when the box is sound. Aftermarket Blum or Grass upgrades are a solid pick when you want better soft-close performance than the original hardware gave you. What we avoid is a no-name hinge that won’t seat in the 42mm cup, because a part that doesn’t fit is worse than no part at all.
Repair is the clear win for hardware and for water-damaged face frames. Hinges, glides, drawer boxes, and door fronts can usually be sorted without touching the carcass. The decision flips once the particleboard carcass has swelled more than a few inches at a sink base. At that point a patch is cosmetic and the swelling returns with the next drip, so replacing that one box is the smarter money.
Here’s how that plays out in practice. A homeowner with a Vantage kitchen starts seeing the sink base swell and the door drop after years of slow leaks under the sink. A pro typically finds the particleboard box has absorbed water and the stiles are holding moisture. The usual fix is to cut out the damaged sink base and replace it with a plywood box, then rehang the door with stainless hinges, while checking the dishwasher opening for the same issue. That’s the repair path we’d walk you through on a free estimate. Call (844) 834-8322 to book one.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every door and drawer, check the box for swelling and soft spots, test each hinge and glide, and look at the wall and floor behind the cabinets. For a KraftMaid kitchen we identify the series first, because Vantage, Reflections, Prelude, and Sonata each call for different hardware and a different repair strategy.
- 2
Repair or install. For repairs we match the part to the existing mounting pattern and avoid drilling new holes in a face frame unless it’s required. For installation we set the run level and plumb, shim against out-of-square walls, and confirm door reveals before we call it done. For refacing we address the box first, since a new door front on a swollen carcass just hides the problem.
- 3
Test. Every door gets cycled, every drawer gets loaded and run full travel, and every soft-close mechanism gets checked for a clean, even close. We check the sink base and dishwasher opening for moisture one more time before we leave.
- 4
Warranty. We explain what our workmanship covers and hand you the record of what was replaced. If a manufacturer claim is ever relevant, you’ll have the documentation to support it.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Fullerton

We work across the KraftMaid line as it shows up in Fullerton homes: base cabinets and sink bases, wall cabinets, tall pantry and oven cabinets, drawer boxes, door fronts, and the hinges and glides that hold them. We handle cabinet installation and refacing, and we do kitchen design and layout work when a homeowner is rethinking the run rather than just repairing it.
That layout work matters more here than in a newer city. Many Fullerton kitchens sit in 1950s tract parcels with narrow side yards and a detached rear garage on alley access, so the kitchen footprint rarely changes without touching something structural. We design around the space that exists rather than selling you a layout the house can’t hold. We also install countertops and backsplashes to finish the job.
We Also Service These Brands
Cabinet work is one trade in a full-scope renovation, and we handle the rest under the same coordination. We work with Kohler fixtures in bathrooms and kitchens, GAF roofing systems overhead, PGT windows and doors, and Master Halco fencing and gate lines. If your project spans a kitchen, a bath, and the exterior, you’re not sourcing three contractors and hoping they talk to each other.
FAQs – KraftMaid Construction Service in Fullerton
No. We’re an independent service provider, not a KraftMaid dealer, and we’re not authorized or factory-certified by the manufacturer. We service and install KraftMaid cabinetry because we know the product line in depth, not because the brand endorses us. Call (844) 834-8322 for a free estimate.
Yes. We source quality parts that fit the specific cabinet, and we won’t force a part that doesn’t match. For KraftMaid we’ll use factory drawers, hinges, and glides when the box is sound, and Blum or Grass upgrades when better soft-close performance is what you’re after. We avoid no-name hinges that won’t seat in the 42mm cup.
A hardware repair like a hinge or glide replacement is usually a single visit. A sink-base replacement takes longer because the box has to be cut out and a new one fitted and finished. Full installation or a kitchen remodel runs to a schedule we set in the written estimate. Call (844) 834-8322 and we’ll scope it for your Fullerton kitchen.
We cover base and wall cabinets, sink bases, pantries, drawer boxes, door fronts, and the hardware that holds them, across the Vantage, Reflections, Prelude, and Sonata lines. That includes installation, refacing, repair, and kitchen layout work. Call (844) 834-8322 to confirm your specific cabinet.
Usually yes. Sonata drawer construction uses solid wood drawers, and factory glides are still available for most of the line. Where a factory glide isn’t obtainable, a Blum or Grass upgrade is a solid alternative that often performs better than the original. We confirm fit before ordering.
It depends on how far the swelling has spread. If the particleboard carcass has swelled more than a few inches, replacing that sink base box with a plywood one is usually the smarter fix. A patch on a swollen box tends to fail again at the next drip. Call (844) 834-8322 for a free estimate and we’ll tell you which path fits.
In most cases a matching replacement door front can be sourced for the Reflections full-overlay line. If the exact finish is discontinued, refacing the run is the practical alternative. We check availability before recommending anything. Call (844) 834-8322 to start.
Often yes, if the box sizes match and the wall is reasonably true. Fullerton’s older homes rarely have plumb walls, so we check the opening before ordering anything. If the run needs adjustment, we’ll say so up front rather than after delivery.
Yes. If you’ve already bought KraftMaid cabinets, we’ll install them. We check the order against the space, flag any size or hardware mismatch, and set the run level and plumb. Call (844) 834-8322 and have your order sheet ready.
Typical estimated ranges for Fullerton cabinet and kitchen work appear below. These are estimates only; the written line-item estimate sets the final price, and there are no change orders after the fact.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Call (844) 834-8322 for an exact quote. Estimates are free.
Book Your KraftMaid Service in Fullerton, CA
Whether your Vantage sink base is swelling, a Reflections hinge has snapped, or you’re planning a full kitchen install, we’ll diagnose it and give you a written estimate before any work starts. Call (844) 834-8322. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Fullerton.












